25-1 Balsa Glider
PRICES
| 250 | 500 | 1000 | 2500 | 5000 | 10,000 |
| $1.66 ea. | $1.64 ea. | $1.62 ea. | $1.60 ea. | $1.58 ea. | $1.56 ea. |
(6A)
All Prices in U.S. Dollars. Subject to change without notice.
IMPRINT AREA
8” Balsa Wing. Imprint Area: approx. 1¼” x 3 3/8” each side.
Wing MUST have border imprinted as shown, NO Imprint is allowed in middle ½” of wing.
PRODUCTION TIME
Approx. 10-15 working days.
For standard 250-10,000 pcs. larger qtys contact factory for schedule.
Best Seller! Can be flown indoors or outdoors. A perfectly proportioned glider designed for maximum flyability. All parts smoothly machined – no die-cut parts. Individually packaged in sealed poly bag.
- Wing Span: 8”
- Standard Imprint Color: Black
ONE TIME Printing Plate charge (per color): $85.00 (G) for 25-1.
Wing color change, to other ‘standard’ colors of red, blue, green, black, and purple: $24.00.
Wing color change, to PMS match: $149.00.
Second Color Plate charges: $85.00 (see above) for each additional Printing Plate.
Second Color: $29.00 per color set-up charge and $19.00 per thousand run charge.
Pre Production Sample: $149.00.
Package Size: 1½” x 9¼”
Standard Pack: 1250 pcs. per carton
Carton Size: 25.75″ x 16.875″ x 10.75″
Weight: 15 lbs. Dim wt.: 30 lbs. Cu. Ft: 2.70.
LESS THAN STANDARD PACKAGING:
25-1, 250 pcs. Carton Size: 15.375″ x 11.375″ x 7.125″, wt. approx 5 lb.
25-1, 500 pcs. Carton Size: 18.75″ x 12.5″ x 9.875″, wt. approx 8 lb.
25-1, 700 pcs. Carton Size: 21.0″ x 15.25″ x 11.5″, wt. approx 10 lb.
25-1, 1000 pcs. Carton Size: 18.5″ x 13.625″ x 15.75″, wt. approx 14 lb.
NORMAL PACKAGING:
All balsa gliders are individually packaged in a clear heat sealed poly bag. Poly bagged gliders are then bulk packed.
PACKING & SHIPPING INFORMATION:
Quotation upon request for less than standard case pack. Split shipment charge is $9.00 per carton.
F.O.B. POINT: Factory dock in Wakefield Massachusetts, U.S.A.
AGES:
Recommended age for balsa glider is 8 and up.
OVERRUNS / UNDERRUNS:
All orders subject to 5% overrun or underrun.
ABSOLUTE MINIMUM:
250 pc. minimum order for all balsa gliders.
PROOFS & ORDER CONFIRMATION:
It is Guillow’s policy to send one free proof on all orders. Proofs are sent via email at no charge within approx. 2 days from receipt of order. Proofs can be emailed if provided with an email address. Proofs will be sent as a .pdf file type unless another file type is preferred. Proofs must be approved before plates can be made. Delays in returning proofs will necessitate a new ship date if needed.
PILOT FIGURE AND TAIL SURFACE:
Tail surfaces and pilot figure on No. 26-1, 30-1, 37-1, 43-1, 50-1, 50-2, and 50-3 are preprinted and remain in standard colors. For any color change see the Other Charges information.
PLATE CHARGE:
Per color (one time). Plates will be disposed of approx. 2 years after last order. Any reorder after that will incur a new plate charge.
WING IMPRINT AREA:
No copy allowed in center of wing area. All glider wings will have a printed thin border line around the outside perimeter as illustrated in the photos of products. This line is necessary for registration purposes. Templates for all our gliders are available on our downloads page. No bleed off wing is allowed.
PRINTING PROCESS:
Our Balsa Gliders are printed using letter press method. We print in spot colors only. 4 color process is not available. Multi colors can shift slightly when printed. Tight registration is not recommended.
MINIMUM FONT SIZE AND LINE THICKNESS:
Fonts less than 8 pt. will be hard to read. Bolder fonts can fill in when printed. Reverse or knock out fonts should be over 8 pt. and should be a thicker typeface. Lines that are less than .007″ will not print well. Reverse lines should be .01″ or thicker to get the best print.
PRE PRODUCTION SAMPLE:
One color actual production sample available – $149.00. Price includes plate. Up to 10 working days for production. PMS color match charges apply. Additional colors will require additional charges, call factory for pricing and production time.
NORMAL PRODUCTION TIME:
Production times for quantities up to 10,000 are quoted next to each glider. From 10,001 to 25,000 – Approx. 20 working days from receipt of order & artwork. Larger quantities, additional colors or special packing please request production schedule. No imprint orders – 5 days.
PRICES:
All prices in U.S. Dollars. Subject to change without notice.
When preparing artwork for e-mail, please convert all fonts to outlines.
Raster | Scanned artwork – Raster images must be clean black and white, minimum 300 dpi, and actual size they are to be imprinted.
E-mail promotional@guillow.com. Please include your name, company name, and purchase order number and item you are imprinting.
Template is available below.
